The Proserv Group
Established for over 30 years our group of companies offers wide-ranging yet niche technical expertise to international oil and gas markets.
MOBILE FLUSHING UNITS
Proserv offers a wide range of various flushing units/rigs with diesel-engine drive and electrical drive options. Particle counters and oil cleanliness monitors are used for continuous trend monitoring and to help optimize the flushing time.
During new system start up
Subsequent to a critical components failure in the system viz.
valves, pumps, hydraulic motors etc.
|
With our large stock we are able to deliver the right equipment to any onshore or offshore location 24 hours a day, 7 days a week. Our expertise and professionalism ensure that you get reliable and well-maintained equipment and the right service. We offers a wide range of mobile hydraulic test equipment for hire to the construction, pipelines, installation, modification and maintenance market. Flushing & Cleanliness ControlNewly built up systems are more susceptible to various contaminations like dirt, dust, rust, welding scale etc. leading to failures in most of the hydraulic systems. System contaminants like particulate, water are the route cause of failure and effect can be catastrophic failure of equipment and expensive downtime for repair. |
Mobile flushing units for sale and hire:
|
| DATASHEET | Area: Onshore Dimension: B = 860 L = 1600 H = 1500 Tara Weight: 400kg Pump: HARBEN P 6.20 Max discharge pressure: 345 Bar Max flow at rate: 38 ltr/min @ 50 bar Max flow at max pressure: 26 ltr/min @ 345 bar |
|
| DATASHEET | Area: Offshore ATEX 113GCT3 Zone 2, Norsok Z-015 Dimension: B = 1500 L = 3500 H = 1760 Weight: 2700kg Lifting/Transport: Frame with pockets for forklift & lifting lugs according to DNV 2.7.1 Pump 1: CAT 6841 Max pressure pump: 140 Bar Max flow pump: 182 ltr/min |
|
| DATASHEET | Area: Offshore ATEX 112GCT4 Zone 1, Norsok Z-015 Dimension: B = 900 L = 1650 H = 1350 Weight: 1000 kg Lifting/Transport:_Frame with pockets for forklift/"Maskindirektivet 522" Pump: HARBEN 8 x 20 Reservoir capacity: 300 litre Max flow 50Hz: 45 ltr/min Max pressure 50Hz: 345 bar |
|
|
|
Area: Offshore 2.7.1 ATEX 112GCT4 Zone 1, Norsok Z-015 Dimension: B = 1500 L = 2500 H = 1760 Tara Weight: 1850kg Lifting/Transport: Frame with pockets for forklift & lifting lugs according to DNV 2.7.1 Pump 1: HARBEN 8.20 Max pressure pump: 345 Bar Max flow pump: 47 ltr/min |
|
| DATASHEET | Area: Offshore 2.7.1 ATEX 112GCT4 Zone 1, Norsok Z-015 Dimension: B = 1500 L = 3000 H = 1760 Tara Weight: 2850kg Lifting/Transport: Frame with pockets for forklift & lifting lugs according to DNV 2.7.1 Pump 1: CAT 6811 with frequency converter Max pressure pump: 345 Bar Max flow pump:57 ltr/min |
|
| DATASHEET | Area: ATEX 113GCT3 Zone 2, Norsok Z-015 Dimension:B = 1100 L = 1650 H = 1450 Weight: 1400 kg Lifting/Transport: Frame with pockets for forklift & lifting lugs according to "Maskindirektivet 522" Pump 1: DENJET 40/550 Pump 2: MARSHAL SEA Max pressure pump 1: 550 Bar Max flow pumpe 1: 36 ltr/min Max pressure pump 2: 1000 Bar Max flow pump 2: 5 litre |
|
Flushing is recommended in the following situations:
Proservīs cleanliness control approach reduces equipment maintenance and operating costs by removing damaging particulate, water contaminants from industrial fluid power system. We recommend high velocity flushing procedure using turbulent flow for effective clean up of a system.
We have trained technicians team who are well aware about the latest development and trends in flushing technology.
|
SCANDINAVIA For more information: E-mail |
MIDDLE EAST For more information: E-mail |
FAR EAST For more information: E-mail |
Vision
Our vision is to build an international oilfield service company in which our strategic business unit is considered a world leader within test and control systems.
Downloads
Test & Control Systems brochure
(PDF, 2mb)
© Proserv Group